FT 101 ZD Mk lll slightly off frequency

You Got questions? We got answers!

Moderators: KE7GUY, KC9FOZ, EA5/G0KOM, KG6JEV

FT 101 ZD Mk lll slightly off frequency

Postby kc8pcl » Tue Jul 17, 2018 2:29 pm

FT 101 ZD Mk lll

Postby kc8pcl » Mon Jul 16, 2018 5:04 pm
I have a 101zd mk lll that I need to align the radio to be on frequency, I made an RF probe and the manual says on pin 3 of MJ3 is where to connect the probe to. I am looking for 300mv at that point but not seeing any where near that. am I looking for micro volts or millivolts at that point ?? Sure could use some help here. the radio is not very far off frequency it is real close but needs a little adjusting. hope to hear from any one about this, Thank you
Posts: 2
Joined: Tue Feb 10, 2015 12:19 pm

Return to Elmer Corner

Who is online

Users browsing this forum: No registered users and 1 guest