FL-2100B Repaired

L@@king for info for your amplifier

Moderators: KE7GUY, KC9FOZ, EA5/G0KOM, KG6JEV

FL-2100B Repaired

Postby AD7GR » Sun Nov 18, 2007 2:34 am

I found a ground path through the grid circuit and now that is taken care of.

Now on Standby I have zero IP and about 2350 plate voltage. On Operate I now have 250ma IP and, when I key down, 500W out on my Heathkit HM-2140 meter into a Cantenna dummy load.

I have about .025ma Idle current so I believe I need to adjust the bias level a bit and check for possible input coil realignment. At least that is what I led to believe through my reading. I also key the amp indirectly through an AmpKeyer.

Thanks to all who had comments.

Ed - ad7gr
Posts: 9
Joined: Tue Oct 16, 2007 10:51 pm
Location: Eastern Oregon

Return to Amplifiers QRO

Who is online

Users browsing this forum: No registered users and 1 guest