Fox Tango International Forum Index Fox Tango International
Yaesu Users Forum
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

ft 736 weak transmit

 
Post new topic   Reply to topic    Fox Tango International Forum Index -> VHF/UHF Transceivers
View previous topic :: View next topic  
Author Message
kc2fzn



Joined: 03 Mar 2008
Posts: 8
PostPosted: Thu Jan 21, 2010 9:21 pm    Post subject: ft 736 weak transmit Reply with quote
The tech manual states to start signal tracing at the mike amp which is Q02 in the schematic. I.m using an RF probe and on touching the legs of this transitor i get no reading on my meter. The emitter,collector,base voltage readings are .08/2.75/.68. The tech sheet states they should be 3.42/7.41/4.11. Can i assume that this may be the problem? I'm new at this so i can use all the advice you can give me.
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Fox Tango International Forum Index -> VHF/UHF Transceivers All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group