Fox Tango International Forum Index Fox Tango International
Yaesu Users Forum
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Need Parts for Yaesu FT-107 (no RX/TX)

 
Post new topic   Reply to topic    Fox Tango International Forum Index -> HF Transceivers
View previous topic :: View next topic  
Author Message
kc5jlo



Joined: 04 Feb 2010
Posts: 2
PostPosted: Mon Feb 08, 2010 9:19 pm    Post subject: Need Parts for Yaesu FT-107 (no RX/TX) Reply with quote
I have Ft-107 that the meter is all the way to the left, when switched ON to Vcc and falls back on any other setting.
The RX is very weak and noisy, always sound like the coax is out. I hear some very strong station (G5RV).
Using the Dummy load no TX output, very little current draw (MOX-FSK). So far I have changed the 3sk51-03 (Q1001) cross to NTE454.
Which boards would you recomend? Where can I find expander boards if needed?
Could these boads be the problems PB-2002b, AF module PB-2006b and ft-107 Final amplifier.
Thanks for any info
73's
KC5JLO
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Fox Tango International Forum Index -> HF Transceivers All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group